Call 800.326.3376
Request a Quote
    
C51000 Strip
Phos Bronze Grade A 5%
C510 | 510 | CDA510 | CA510 | 51000

Copper Tin Phosphorus 
94.9% 5% 0.1% 

Description

Grade A Phosphor Bronze Strip, C51000 is the cost effective choice for many electronic, electrical, or automotive applications due to its inherant resistance to stress relaxation. Connectors stamped out of phosphor bronze exhibit superior performance over time. Brookes material has been thermally treated to provide greater formability while not sacrificing strength performance.

Features
  • High Strength
  • Good Formability
  • Excellent Connector for Telecommunication Spring Applications
  • Low Memory
  • Ideal Shear / Yield Ratio
Meets ASTM-B103 Specifications (The following are also available upon request:)
  • ASTM-B103
Forms Available

CoilGauge 0.002" to 0.090"Width 0.060" to 25" Request a Quote!
SheetGauge 0.002" to 0.060"Width 0.250" to 24.5"Length 0.500" to 144"Request a Quote!
SpoolGauge 0.005" to 0.060"Width 0.060" to 2"Weight 5 - 4,000 lbs.Request a Quote!

Shop Online for Small, High Quality Coils at ExpressCoils
Physical Properties
 
Density0.320Lbs. per cubic inch @ 68°F (annealed)
Modulus16Elastic modulus in tension x 106 P.S.I.
Electrical Conductivity15% IACS at 68°F (annealed)
Thermal Conductivity40BTU per foot per hour per °F at 68°F (annealed)
Thermal Expansion9.9Inches per inch x 10-6 from 68°F to 572°F

Mechanical Properties
 
Tensile StrengthYield OffsetElongationHardness
x 1000 P.S.I.0.2% offset x 1000 P.S.I.% in 2 Inches.020 Gauge and Above
060 Ann
43 - 5819 - 3148 - 6230T 24 - 59
H01 1/4H
49 - 6122 - 5232 - 5030T 43 - 63
H02 1/2H
58 - 7347 - 6816 - 3830T 53 - 73
H03 3/4H
68 - 8061 - 7510 - 2030T 66 - 73
H04 Hard
76 - 9174 - 884 - 1130T 71 - 78
H06 Ex-H
88 - 10385 - 1022 - 630T 74 - 81
H08 Spring
95 - 11092 - 1081 - 330T 76 - 82
H10 Ex-Spring
100 - 11498 - 1101 - 330T 77 - 83

Hardness Legend  30T : Rockwell (30 kgf Steel Sphere)  

NOTE: The information contained herein are intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. It is given without obligation or liability. Contact us for manufacturers' complete material property datasheets.

Customer Service Agent  Have a question on C51000? Need help selecting the right metal for your specific requirement? Call us today
at (800) 326-3376.